How a Medical Alert Piece Is Made

A medical alert piece has to do two jobs at once, and the making is where both are decided.

People ask me why a piece takes fourteen working days when they could have a stainless steel one by Thursday. It is a fair question. This is what happens to a piece of silver between the day you order and the day it arrives, and why each step is done the way it is.

In short

  • Sterling silver or solid 9ct gold. Never plated, never gold filled, because plating wears through at the edges on something worn daily.
  • Fourteen working days in silver, up to six weeks in gold. That is making time, not posting time. Nothing sits on a shelf.
  • Planishing is done by hand with a polished hammer, which is why no two pieces catch the light in quite the same way.
  • Stones are set flush, not raised in claws and not glued, so there is nothing standing proud to catch on a sleeve.
  • Engraving is laser cut deep and filled in black, so it stays readable rather than wearing smooth.
  • Gold is hallmarked at an assay office. Silver is stamped 925, because these pieces sit below the weight at which hallmarking is required.
  • I read through every engraving myself before anything is cut.

It starts with solid metal

Every piece here is sterling silver or solid 9ct gold. Nothing is plated and nothing is gold filled.

That distinction matters more on medical alert jewellery than it does on most jewellery. Plating is a thin skin of precious metal over something cheaper. On a piece that is worn every day, showered in and slept in, it wears through at the edges and the high points first, and what is underneath begins to show. A medical alert piece is meant to be worn constantly for years, which is exactly the kind of wear that finds the weakness in plated metal.

Solid metal has no layer to wear through. It marks and it softens, the way silver does, but it stays what it is. There is more on the two metals in the guide on silver or gold, and why nothing here is plated.

Cutting and shaping

Each piece begins as sheet or bar. The shape is cut, the edges are filed, and then it is worked until it sits right. That last part is the bit that takes the time, and it is the bit nobody sees.

On the layered pieces, the two halves are cut separately and soldered together. That is why a layered heart takes longer at the bench than a single disc, and why the two are priced differently.

Cutting a medical alert pendant to shape with a jeweller's saw at the workshop bench in Staffordshire
Cutting a piece to shape. Everything starts here.

Planishing, and why it takes so long

Planishing means hammering the surface by hand with a polished hammer. Because the face of the hammer is itself polished, every blow leaves a bright, highly polished mark in the metal. The surface ends up shining and catching the light as the piece moves, which is what makes a planished piece so lovely to look at.

It is done one blow at a time, and the marks fall slightly differently on every piece. That is the reason no two planished pieces are quite identical, and it is the difference between something made and something stamped out by the thousand.

It is also the slowest decorative step in the workshop. A press would texture a hundred pieces in the time this takes for one, and they would all be identical. I would rather have the one.

Planishing a medical alert pendant by hand with a polished planishing hammer at the workshop bench
The planishing hammer. Every mark on every piece is put there one at a time.

The stones

On the crystal and birthstone pieces, the stone arrives already set, sitting flush with the metal rather than raised up in claws. It is not glued in.

Flush setting earns its place on something worn every day. Nothing stands proud to catch on a sleeve and nothing sits up where it can be knocked. It is a quieter look, and it survives ordinary life better.

Polishing

Then the piece is polished. This is the least glamorous part of the whole process and the one that makes the most difference to how a piece looks when the box is opened.

It is also the reason a handmade piece and a mass produced one can be the same shape in the same metal and still not look remotely alike.

Polishing a sterling silver medical alert disc by hand with a pendant motor
Polishing a disc. Nobody photographs this part, and it is the part you notice.

Engraving, which is the whole point

Last of all come your details. The engraving is laser cut deep into the metal and filled in black, so it stays readable through years of daily wear rather than wearing smooth. It is always in capitals, for clarity at arm's length.

Stamping is the traditional method and a perfectly good one, but each character is struck separately, so depth and spacing vary across a line. Where somebody may be reading four lines of small capitals in a hurry, I would rather every character were identical and every line sat straight.

I read through every engraving myself before I start. If there is anything I am not sure about, I will get in touch before anything is cut. There is a good deal more on wording, line counts and what to leave off in the engraving guidance and in the guide on what to engrave on a medical alert bracelet.

Working on a medical alert piece at the bench with a hammer and a punch, wearing safety glasses
Safety glasses on. Most of this job is quieter than people imagine, and some of it is not.

Hallmarking and the 925 stamp

The gold pieces are hallmarked. The piece goes away to an assay office, the metal is tested independently of anything I might say about it, and the marks struck into it record what it actually is and who made it. A hallmark is not something a maker can apply to their own work, which is rather the point of it.

The silver pieces are stamped 925. British law only requires silver to be hallmarked above a certain weight, and these sit below it, so they carry the 925 stamp for the metal instead.

The two words get used loosely elsewhere, and they do not mean the same thing.

Why fourteen days, and up to six weeks for gold

Sterling silver takes fourteen working days. Solid 9ct gold can take up to six weeks.

Nothing sits on a shelf waiting to be posted, so that wait is making time rather than posting time. Gold takes longer because gold takes longer to work, and because it goes away to be hallmarked and has to come back again.

If you need a piece for a particular date, say so when you order and I will tell you honestly whether it is possible. I would rather say no than promise what I cannot do.

The jeweller's bench with files, pliers, hammers and a ring sizer, in a woodland workshop in rural Staffordshire
The bench. Tidier on some days than others.

Why it is worth making this way

There is a plainer argument underneath the craft one, and it is the one I would make to anybody wondering whether the difference is worth paying for. A medical alert piece only works if it is actually being worn, and people wear what they like the look of. Something that feels like hospital equipment comes off at a wedding, or on holiday, or on the days somebody would rather not think about being ill. That is precisely when it is needed.

Ambulance crews in the UK do look for medical alert jewellery, and the wrist and the neck are the usual places.

Questions I am often asked

Can I see a piece before it is engraved?

Not usually, because the engraving is one of the last steps and the piece is made to order. What I can do is talk your wording through beforehand and tell you honestly what fits and what reads clearly. Ring me on 01283 296118, Monday to Thursday.

Will my piece look exactly like the photograph?

It will be the same design, the same metal and the same size. On the planished pieces the hammer marks fall slightly differently every time, so the surface will be its own. That is the nature of the method rather than a fault.

Do you make anything bespoke?

Ask me. Some things are straightforward and some are not, and it depends entirely what you have in mind. There is also a little more about the workshop on the meet the family page.

What if it needs repairing later?

Get in touch. Every piece carries a one year guarantee, and chains are covered for three months. Beyond that, a piece made from solid metal at a bench can usually be put right, which is another quiet argument for solid metal.

Can the engraving be changed later?

Not on an existing piece, because it is cut into the metal rather than printed on it. That is why it is worth choosing wording still true in five years, and there is a section on exactly that in the engraving guidance.

A final word

I trained as a jeweller and silversmith in Birmingham and I have been at the bench for more than twenty five years. Medical alert jewellery came later, and it is the work I am gladdest to do, because these pieces are needed rather than simply wanted.

If you would like to know more about how a particular piece is made, please do ask. Have a look at the medical alert bracelets and the medical alert necklaces when you are ready, or get in touch and I will answer myself.

Julia Usher, Medical Alert Jewellery
This page is general information, not medical advice. Always follow the guidance of your own doctor or care team.

Share information about your brand with your customers. Describe a product, make announcements, or welcome customers to your store.